Cemented carbide strip Tungsten Carbide Flat bar
Cemented carbide has good straightness, excellent hardness, and
stable toughness.
1.Product name: Non-standard or customized tungsten carbide
products
2.Common material: YG6,YG8,YG10,YG11,YG13,YG15,YG20 etc
3.Main products: Customized molds & dies, rod, plate, strips,
cutting tools, TC ring and roller, mining buttons, carbide tips.
4.Dimension: Customized
5.Certification: ISO9001, ISO14001, SGS
Recommended Carbide Grade
| Grade | Physical and mechanical properties | Applications recommended |
| Density g/cm3 | Hardness No Less Than HRA(HV) | TRS No Less Than (Mpa) |
| YG6X | 14.4-14.9 | 91 | 1700 | It's suitable for the finish machining of chilled cast iron,
ductile cast iron, heat-resisting alloy steel, nonferrous metal,
and nonmetal. |
| JL05 | 14.7-15.1 | 91.5 | 1800 | It's suitable for the finish machining of chilled cast iron,
ductile cast iron, heat-resisting alloy steel, nonferrous metal,
and nonmetal, and it can make for the wear part with the
high-quality requirement. |
| YG10X | 14.3-14.6 | 90 | 2000 | Good commonality, high hardness, and toughness. It's suitable for
manufacturing various kinds of integral end mills. Such as integral
drill, milling cutter, hole boring cutter, reamer bit, and so on.
It's mainly used for the finish machining of various kinds of cast
iron and nonferrous metal. |
| JL10 | 14.2-14.5 | 90.5 | 2200 | Good commonality, with high hardness and TRS. It's used for the
semi-finishing of various steel and nonferrous metal. |
Cemented carbide can be used for making the drill bits/ end-mills /
reamers; automobile special cutters, printed circuit board special
cutters, engine special cutters, horologe processing special
cutters, integral vertical milling cutter, graver and etc. Besides,
they can be also used for making of cemented carbide stamping head,
core bar, and perforation tools.
Production and test of Tungsten carbide strip:
1)Carbide Balls will start to prepare the powder as per the customer’s requirement
with our wet-grinding machine
2) Before mass production, we need to do a trial pressing and sintering, and we check the
appearances and the sizes of the samples with a micrometer to
ensure that the requirements of the drawings can be met before
batch production
3) Bulk production, press the raw materials to shape blanks, and
carbide tips must be passed by semi-finished inspection.
4) sinter blanks to finish (HIP) and finished products inspection
to ensure the best quality and production capacity.
